Price: [price_with_discount]
Please set up the led strips on the principle cable at first, after the led strips are all put in, then join energy provide!
Please DO NOT set up or take off the led strip when the controller is powered on. This is simple to get the principle cable burnt!
NOTE:
1：A/B sensors have to be put in on the entrance and exit of the stairs and face the human physique.
2：The product is low voltage 12V-24V, want to attach transformer. Do in a roundabout way join 220V, it can burn the controller.
3：The product will not be waterproof.
How To Use
1. Setting
Long press“Setting" to set Step Numbers, Brightness, Time Delay, Speed, Mode
Short press to“Setting" to enter subsequent setting
After completed all setting, lengthy press“Setting”to avoid wasting all setting
2. Brightness
Brightness have 99 ranges, brief press so as to add 1 stage brightness
Digital show: HH01-HH99
HH01——————2% brightness
HH02——————3% brightness
HH03——————4% brightness
HH99——————100% brightness
3.Time delay
Time delay have 99 ranges, brief press so as to add 1 stage time delay
Digital show: LL01-LL99
LL01——————4S
LL02——————6S
LLO3——————8S
LL99——————200S
4. Speed
Speed have 99 ranges, brief press to regulate velocity
Digital show: EE01-EE99
EE01——————150ms quickest velocity
EE02——————175ms
EEO3——————200ms
EE99——————2600ms slowest velocity
5. Set the working mode of the light strip (12 modes)
FF01——————The first mode
FF05——————The fifth mode
FF010——————The tenth mode
6. Set the variety of stairs
1C01 —————— 1st Floor, 1st ground stairs
1C05 —————— 1st Floor 5 Stairs
1C10 —————— 1st Floor 10 Stairs
2C01 —————— 2nd Floor, 1 Staircase
2C05 —————— 2nd Floor 5 Stairs
2C10 —————— 2nd ground 10 stairs
Product parameters:
Product identify: Smart Stair Sports LED Light Strip Sensor
Voltage: DC12V-24V
Specifications 1: DC12V/120W
Specifications of two: DC24V/240W
Maximum present: 10A
Control Ladder: 16/20 Ladder
