Price: [price_with_discount]
Heat resistance temperature: -20°C-150°℃
Washing directions:
1. Please clear the glass tank earlier than utilizing the product for the primary time. (The glass tank may be positioned within the dishwasher for cleansing)
2. The "press-type vacuum sealing cowl" can’t be soaked or washed in water, however may be wiped with a moist material. (Because there’s a vacuum valve within the cowl, if water or powder enters, the valve within the sealing cowl could also be blocked and the vacuum impact shall be affected. )
3. In order to higher make sure the service lifetime of the sealed tank, when cleansing the glass tank, don’t use exhausting washing instruments akin to metal balls for cleansing.
Instructions to be used:
1. It will not be beneficial to retailer liquid or powder articles within the tank. (Because there’s a vacuum valve within the sealing cowl, water or powder might enter the vacuum valve within the cowl when the tank is dumped, which can result in the blockage of the valve and have an effect on the vacuum impact. )
2. The top of the articles saved within the tank: it is strongly recommended to be decrease than the underside of the "sealed cowl" by 1cm. It is beneficial to press for 20 instances to acquire higher vacuum hypoxia storage impact when vacuum pumping is carried out.
3. In order to make sure a greater storage impact within the tank for a very long time, it’s advised that the air extraction valve on the highest of the sealed lid may be pressed a number of instances each 7-10 days to acquire a greater vacuum and low oxygen storage atmosphere within the tank.
4. According to the precept of thermal enlargement and chilly contraction, it isn’t potential to acquire a very good vacuum impact when sizzling meals is saved within the tank. It is recommended that the new meals needs to be positioned at room temperature earlier than being lined with a sealing cowl for urgent and pumping.
5. During every day use, please don't be near bare flames to keep away from robust influence, in order to not trigger product deformation and have an effect on the use impact.
