Single Strip 20 meters lengthy LED Strip 2835 DC24V 120LEDs/m Home Light Strip Flexible Cuttable Whole Length Is 20m Soft Lamp Bar

Adding comply with to our retailer, The product will take pleasure in an extra 1% low cost.

If you bought LED strips, here’s a 12V/24V drive transformer for LED strips. Click on the picture to view now.

Product Data:

1. LED Quantity: 120LEDs/m,

2. SMD sort: SMD2835

3. LED Strip Size:

      Width of LED gentle strip: 8mm

      Length of LED gentle strip: 5 meters / 10 meters / 15 meters / 20 meters(There are 4 lengths to select from)

4. Input voltage:  DC 24V.

5. Light Color: 3000K – Warm White,

                    4000K – Neutral White,

                    6500K – White (Or Cold White).

6.6. Protection Rate: (There are two choices)

    (1). Non-waterproof (IP20).

    (2). Waterproof       (IP65).

7.  Power per meter: 6W, Power of the entire gentle strip: 120W (Power of 20m gentle strip)

8.  Beam angle: 120°.

9. Working Temperature: -20° to 50°

10. 20m/1 Roll Led strip (not embody any controller,connector or energy provide)

11. There is double-sided tape on the again of the LED gentle strip, Which may be very sticky and may be freely pasted the place you need to paste.

12. The chopping distance of 12V LED strip is 25mm, and that of 24V LED strip is 50mm.

13.The LED strip should be linked to the voltage DC12V or DC24V equivalent to the LED strip. or the LED strip can be burnt out.

14. This LED strip can solely be used after being linked to the town voltage by buying extra transformers. If you have no idea choose the ability of the transformer, please contact us, and we are able to inform you choose the ability of the ability provide.      

15. The 20m LED strip can solely be pushed by a driving energy provide of greater than 150W. The increased the ability of the driving energy provide, the higher. (The product itself doesn’t embody any controller, connector or energy provide)     

16. When the LED strip glints intermittently, it signifies that the ability of the drive energy used for the LED strip is inadequate, and the drive energy with increased energy must be changed.

(*20*)

If you want DC12V or 24V drive energy?   Please click on the picture beneath.